F065
Diamedr Enwol y Bibell Allanol:
- Argymhellir gan Safon Menter Offer Cryogenig HL. Gellir ei gynhyrchu hefyd yn unol â gofynion y cwsmer.
- Pwysedd Dylunio:
- Argymhellir ≤ 16 bar. Neu dewiswch y Math o Gysylltiad Weldio (≤40 bar).
- Deunydd y Bibell Allanol
Heb ofyniad arbennig, dewisir deunydd y bibell fewnol a'r bibell allanol yr un peth.
3.1.3 Math o Gysylltiad Weldio
model
Cysylltiad
Math
Diamedr Enwol y Bibell Fewnol
Pwysedd Dylunio
Deunydd
o'r Bibell Fewnol
Safonol
Sylw
W010
00X
Math o Gysylltiad Weldio ar gyfer Pibell Hyblyg Inswleiddio Gwactod Statig
DN10, 3/8"
8~40 bar
Dur Di-staen Cyfres 300
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Diamedr Enwol y Bibell Allanol: | |
| Pwysedd Dylunio | Deunydd y Bibell Fewnol. | Mae A yn 304, | DN40, 1-1/2" | Mae C yn 316, |
| Mae D yn 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Pwysedd Dylunio |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Argymhellir ≤ DN25 neu 1". Neu'n dewis y Math o Gysylltiad Bayonet Gwactod gyda Fflansau a Bolltau (o DN10, 3/8" i DN80, 3"), Math o Gysylltiad Weldio (o DN10, 3/8" i DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Safonol | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Diamedr Enwol y Bibell Allanol: |
| Argymhellir gan Safon Menter Offer Cryogenig HL. Gellir ei gynhyrchu hefyd yn unol â gofynion y cwsmer. | Deunydd y Bibell Allanol | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Math | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Safonol | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Pwysedd Dylunio. | / | DN25, 1" | DN25, 1" | / | |
| Deunydd y Bibell Fewnol. | / | DN25, 1" | DN25, 1" | / | |
| Mae C yn 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Diamedr Enwol y Bibell Fewnol:
| Argymhellir ≤ DN25 neu 1". Neu'n dewis y Math o Gysylltiad Bayonet Gwactod gyda Fflansau a Bolltau (o DN10, 3/8" i DN80, 3"), Math o Gysylltiad Weldio (o DN10, 3/8" i DN150, 6") | Diamedr Enwol y Bibell Allanol: |
| Argymhellir gan Safon Menter Offer Cryogenig HL. Gellir ei gynhyrchu hefyd yn unol â gofynion y cwsmer. | Pwysedd Dylunio: |
| Argymhellir ≤ 16 bar. Neu dewiswch y Math o Gysylltiad Weldio (≤40 bar) | Deunydd y Bibell AllanolHeb ofyniad arbennig, dewisir deunydd y bibell fewnol a'r bibell allanol yr un peth.3.2 System Pibellau Inswleiddio Gwactod Dynamig3/S |
| 3.2.1 Math o Gysylltiad Bayonet Gwactod gyda Chlampiau | model |
| Cysylltiad | Math |
| Diamedr Enwol y Bibell Fewnol | Pwysedd Dylunio |
| Deunydd | o'r Bibell Fewnol |
| Safonol | Sylw |
HDB01008
Math o Gysylltiad Bayonet Gwactod gyda Chlampiau ar gyfer Pibell Hyblyg Inswleiddio Gwactod Dynamig
lDN10, 3/8"
l8 bar
| Dur Di-staen Cyfres 300 Mae C yn 316, | Deunydd y Bibell Fewnol. | |
| Mae A yn 304, | B yw 304L,Mae C yn 316,Mae D yn 316L, | |
| E yw arall. | HLH | DB01508 |
| DN15, 1/2" | Pwysedd Dylunio: | Pwysedd Dylunio: |
| DN20, 3/4" | Pwysedd Dylunio: | Pwysedd Dylunio: |
| DN25, 1" | Pwysedd Dylunio: | Pwysedd Dylunio: |
| Diamedr Enwol y Bibell Allanol: | Pwysedd Dylunio: | Pwysedd Dylunio: |
Argymhellir ≤ 8 bar. Neu dewiswch y Math o Gysylltiad Bayonet Gwactod gyda Fflansau a Bolltau (≤16 bar), Math o Gysylltiad Weldio (≤40 bar)Deunydd y Bibell AllanolHeb ofyniad arbennig, dewisir deunydd y bibell fewnol a'r bibell allanol yr un peth.
Cyflwr Pŵer:
HL-HX-X-Mae angen i'r safle gyflenwi pŵer i'r pympiau gwactod a rhoi gwybodaeth drydan leol (Foltedd a Hertz) i HL Cryogenic Equipment.-00-X
3.2.2 Math o Gysylltiad Baionet Gwactod gyda Fflansau a Bolltau
model
Cysylltiad
Math
Diamedr Enwol y Bibell Fewnol
Pwysedd Dylunio
Deunydd
o'r Bibell Fewnol
Safonol
Sylw
Nominal Diameter of Inner Pipe
00X
8~16 bar
DN10, 3/8"
8~16 bar
Dur Di-staen Cyfres 300
Design Pressure
Pwysedd Dylunio.
08 yw 8bar,
16 yw 16 bar.
Deunydd y Bibell Fewnol.
Mae A yn 304,
B yw 304L,
Mae C yn 316,
Mae D yn 316L,
E yw arall.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Cyfres Gwahanydd Cyfnod Inswleiddio Gwactod | DN10, 3/8" | Armeneg
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FfrangegDiamedr Enwol y Bibell Allanol:X | DN15, 1/2" | |||||
| FfrangegArgymhellir ≤ 16 bar. Neu dewiswch y Math o Gysylltiad Weldio (≤40 bar).X | DN20, 3/4" | |||||
| FfrangegCyflwr Pŵer:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islandeg
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Ffrangeg08 yw 8bar,00X | a 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FfrangegSamoaidd00X | DN15, 1/2" | |||||
| FfrangegSindhi00X | DN20, 3/4" | |||||
| FfrangegTajic00X | DN25, 1" | |||||
| FfrangegThai00X | DN32, 1-1/4" | |||||
| FfrangegWsbeceg00X | DN40, 1-1/2" | |||||
| FfrangegXhosa00X | DN50, 2" | |||||
| FfrangegSwlw00X | DN65, 2-1/2" | |||||
| FfrangegOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Cyflwr Pŵer:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Dur Di-staen Cyfres 300 | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FfrangegDN15, 1/2"00X | DN15, 1/2" | |||||
| FfrangegDN20, 3/4"00X | DN20, 3/4" | |||||
| FfrangegDN25, 1"00X | DN25, 1" | |||||
| FfrangegW03200X | DN32, 1-1/4" | |||||
| FfrangegW04000X | DN40, 1-1/2" | |||||
| FfrangegW05000X | DN50, 2" | |||||
| FfrangegW06500X | DN65, 2-1/2" | |||||
| FfrangegW08000X | DN80, 3" | |||||
| HPibell Siaced Gwactod00X | DN100, 4" | |||||
| HFalf Rheoleiddio Llif Ocsigen Hylif Tsieina00X | DN125, 5" | |||||
| HPris Cyfanwerthu Tsieina Tanc Safon ISO Tsieina 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSSystem Pwmp Gwactod Dynamig00X | Cyfres Gwahanydd Cyfnod Inswleiddio Gwactod | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FfrangegWhatsapp00X | DN15, 1/2" | |||||
| FfrangegWeChat00X | DN20, 3/4" | |||||
| FfrangegAlmaeneg00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Groeg
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Daneg
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaoaiddX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Armeneg
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHEstonegX | DN15, 1/2" | |||||
| HLHFfrisegX | DN20, 3/4" | |||||
| HLHGwjarataiddX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islandeg
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalam00X | Maori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamoaidd00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHDTajic00X | DN25, 1" | |||||
| HLHDThai00X | DN32, 1-1/4" | |||||
| HLHDWsbeceg00X | DN40, 1-1/2" | |||||
| HLHDXhosa00X | DN50, 2" | |||||
| HLHDSwlw00X | DN65, 2-1/2" | |||||
| HLHDOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
